232 Service, Maintenance
Coola nt temperat ure
If the temperature gauge enters the red
zone, check the coolant level immediately.
z Coolant level too low:
Add coolant. See notes under "Anti-
freeze and corrosion protection" and
"Coolant level". Have a workshop
eliminate the cause of the coolant loss.
z Coolant OK:
Have the cause of the raised coolant
temperature eliminated. Contact a
workshop.
Picture no: 14765s.tif
Brake fluid
Brake fluid level
The brake fluid level in the reservoir must
be neither higher than the MAX mark nor
lower than the MIN mark.
Use of certain brake fluids can lead to
damage or reduced braking effect. We
therefore recommend that you use only
approved high-performance brake fluid.
Absolute cleanliness is important when
topping up, since contamination in the
brake fluid can cause brake system
malfunctions.
After correcting the brake fluid level, have
a workshop eliminate the cause of the
brake fluid loss.
9 Warning
Brake fluid is poisonous and corrosive.
Do not allow it to come into contact with
eyes, skin, fab ric or painted surfaces.
Direct contact could cause injury and
damage.
Kommentare zu diesen Handbüchern