Vauxhall Meriva Bedienungshandbuch PDF herunterladen (Seite 186)

181Self-help, Vehicle Care

Picture no: 14762s.tif

4. Before positioning the jack 3, set it to the

necessary height by rotating the eye by

hand. Position the jack arm at the front

or rear so that the jack claw (see arrow in

illustration) spans the vertical base and

grip s in the rece ss in the vertical base .

Make sure it is properly positioned.

With VXR 3 and VXR Line 3, the jack 3

must not be used, since the vehicle may

be damaged. Consult a workshop.

Picture no: 14763s.tif

The ed ge of the jack base must be on the

ground directly below the jacking point,

in a manner that prevents it from

slipping.

Raise vehicle by turning crank handle.

If this is not the case, carefully lower the

vehicle immediately and reposition the

jack.

5. Unscrew wheel b olts and wipe clean with

a cloth. Then apply a light coating of

grease to the wheel bolts. Do not grease

the thread of the bolts. Do not put the

wheel bolts down in a location where

they may become soiled.

Picture no: 11647s.tif

If the wheel bolts have retaining

washers 3, they must not be removed.

6. Change the wheel. Notes on spare

wheel – see page 177, notes on

temporary sp are wheel – see page 178.

7. Screw in wheel bolts and tighten slightly,

inserting the wheel bolt wrench 3 as far

as possible.

8. Lower vehicle.

9. Tighten wheel bolts crosswise, p utting on

wheel bolt wrench 3 as far as possible.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 249 250

Keine Kommentare

Vauxhall Meriva Bedienungshandbuch Seite 186