Vauxhall KTA-2685/8-VX-en Bedienungshandbuch PDF herunterladen (Seite 245)

244 Vehicle care

4. Carefully withdraw tail light

assembly from recesses and

remove. Make sure that the cable

duct remains in position.

5. Detach wiring plug from bulb

carrier.

6. Remove the bulb holder by

turning anticlockwise and replace

the bulb by withdrawing or

pushing the bulb slightly into the

socket and rotating anticlockwise:

Tail lights (1 + 2)

Turn signal light (3)

Brake light (4)

7. Connect the wiring plug and press

the cable into the retainer. Fit light

assembly with the retaining pins

into the recesses of the car body

and tighten the securing nuts from

the inside of the load

compartment. Attach cover.

When assembling press the blind

on the left-hand side into the

rubber grommets to reach full

retention force.

Light assembly in the tailgate

1. Open the tailgate and remove the

blind covers on the respective

side.

2. Unscrew and remove the screws.

3. Remove the tail light assembly

and detach wiring plug from the

bulb carrier.

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 326 327

Kommentare zu diesen Handbüchern

Keine Kommentare